车载工业计算机-OBPC-1033

★Intel Atom® x6413E quad-core processor, 9W
★Compact and fanless design
★5G NR and Wi-Fi 6/6E wireless communication options
★Built-in U-blox M9N GNSS
★Built-in 1 x CAN bus 2.0B (optional SAE J1939)
★1 x mini-PCIe + 2 x M.2 socket expansions
★2 x POE support, total 60W (nROK 1031-C2)
★Dual display outputs
★Optional AI accelerator M.2/mPCIe module
★Certified by CE/UKCA/FCC/EN 50155
ꄴ上一个： 车载工业计算机-OBPC-1912
ꄲ下一个： 车载工业计算机-OBPC-1032

  • 产品规格

    CPU Intel Atom® x6413E quad-core processor, 1.5GHz, TDP 9W
    Memory 1 x 260-pin DDR4 SO-DIMM socket support 3200MHz up to 32GB. Default 2666MHz, 4GBWith In-Band ECC (IBECC)
    Video Output 1 x HDMI 1.4b up to 3840 x 2160@30Hz1 x VGA port 1920 x 1200@60Hz
    Storage 1 x 2.5” SATA 3.0 internal drive bay (9.5mm)1 x M.2 2280 Key M for SATA 3.0
    Expansion 1 x Full size mini-PCIe socket (USB 2.0, PCIe 3.0), BOM optional M.2 3042 Key B socket (USB 2.0, USB 3.2 Gen 2) for LTE/5G NR module with 1 x internal micro-SIM and 1 x external micro-SIM1 x M.2 2230 Key E socket (USB 2.0, PCIe 3.0 x2), BOM optional M.2 2230 Key E socket (USB 2.0, PCIe 3.0, PCIe 3.0)1 x M.2 3042/3050/3052 Key B socket (USB 2.0, USB 3.2 Gen 2) for LTE/5G NR module with 1 x internal micro-SIM and 1 x external micro-SIM
    GNSS and Onboard Sensor 1 x Default U-blox NEO-M9N GNSS module for GPS+QZSS/Glonass/Galileo/Beidou1 x 3D accelerometer and 3D gyroscope
    LAN and Power over Ethernet 1-Port LAN M12 X-coded, 10/100/1000/2500 Mbps Ethernet, Intel® Ethernet Controller I225-IT (support WOL)1-Port LAN M12 X-coded, 10/100/1000 Mbps Ethernet, Marvell Ethernet PHY 88E15122-Port LAN M12 X-coded, 10/100/1000/2500 Mbps Ethernet, PoE 802.3af/at, max 60W, isolation (nROK 1031-C2)
    Security TPM 2.0: Infineon SLB9670VQ2.0 FW7.62
    I/O Interface-Front 6 x LED indicators (including 1 x programmable LED)1 x USB 3.2 Gen 2 type A (5V/0.9A)1 x USB 2.0 type A (5V/0.5A)1 x Externally accessible micro-SIM card sockets with cover1 x Reset button1 x Power button1 x DB9 (COM) for full RS232/422/4851 x DB9 (Audio) for 1 x Mic-in, 1 x Line-out1 x DB9 for Expansion Port (Optional)2 x M12 X-coded PoE, including 2 x PoE LED light (nROK 1031-C2)4 x SMA connector holes for WWAN (nROK 1031)
    I/O Interface-Rear 1 x HDMI1 x VGA1 x LAN (LAN1) M12 X-coded, 10/100/1000/2500 Mbps1 x LAN (LAN2) M12 X-coded, 10/100/1000 Mbps1 x M12 A-coded 8-pin for 2 x USB 2.0 (5V/0.5A)1 x DB26 (MULTI PORT)
    - 1 x Isolated CANBus 2.0B
    - 1 x RS232 Tx/ Rx
    - 1 x GNSS speed/direction
    - 5 x DI and 4 x DO
    - 2 x RS485
    - 12V/ 2A DC output
    - GND1 x M12 A-coded 5-pin for power/ignition input1 x SMA connector for GNSS2 x SMA connector holes for WWAN3 x RP-SMA connector holes for WLAN
    Power Management & Software Support Power input 24VDC (9~36VDC) w/o isolationCranking voltage: 6V~9V (< 30 seconds)Reverse protection, OCP & UVPSelectable boot-up & shut-down voltage for low power protection by softwareSetting 8-level power on/off delay time by software10~255 seconds WDT support, setup by softwareSDK (Windows/Linux) including utility and sample code
    Operating System Windows 11/Windows 10/Linux
    Dimensions 180mm (W) x 180mm (D) x 60mm (H)
    Weight nROK 1031: 2.08kgnROK 1031-C2: 2.2kg
    Environment Operating temperatures
    - EN 50155, class OT4 (-40°C ~70°C), 85°C for 10 minutes (w/ industrial SSD) with air flowStorage temperatures: -40°C to 85°CRelative humidity: 90% (non-condensing)Vibration (random)
    - 2g@5~500 Hz (in operation, SSD)Vibration (SSD)
    - Operating: MIL-STD-810H, Method 514.8C, Procedure 1, Category 4, common carrier US highway truck vibration exposure
    - Storage: MIL-STD-810H, Method 514.8E, Procedure 1, Category 24, minimum integrity testShock (SSD)
    - Operating: MIL-STD-810H, Method 516.8, Procedure I, functional shock=40g
    - Non-operating: MIL-STD-810H, Method 516.8, Procedure V, crash hazard shock test=75g
    Certifications CEUKCAFCC Class AEN 50155: 2017
    - Ambient temperature EN 50155, Class OT4 (-40°C ~70°C), 85°C for 10 minutes
    - Interruptions of voltage supply class S1
    - Supply change over class C1
    - EMC EN 50121-1: 2017, EN 50121-3-2: 2016+A1: 2019
    - Environment EN 60068-2-1, EN 60068-2-2, EN 60068-2-30
    - Shock and vibration IEC 61373 Class B
    - Protective coating class PC1 (PC2, by request)EN 45545-2: 2020 (PCB)
ꂃ ꁹ